Sice Gate opener remote control, radio control with 4 FAAC XT4 433 SICE buttons

Specifications:

For duplication you need a perfectly functioning MASTER radio control.
Before starting duplication, carefully read the following instructions:

1 Press the first 2 buttons of the original MASTER remote control at the same time and keep them pressed until the LED flashes and then release the 2 buttons.
2 While the LEDs are flashing, place the MASTER remote control close to the NEW one from the front.
3 On the original MASTER radio control (while the LED is still flashing) press and hold the first button to copy (the LED lights up steadily).
4 Press (on the new remote control) the equivalent button to copy and release it only after the LED has turned off after flashing twice.
5 Release the button on the original remote control.
6 Repeat the procedure for all keys.

If the procedure is not successful or if errors are made during programming, wait 20 seconds and start the programming operation again from point 1.

NOTES: Press any transmission button on the customer's remote control and check what type of flash the LED emits.
If it immediately turns on with a steady light it is a SLAVE (cannot be copied)
If it flashes briefly before turning on with a steady light, it is MASTER (copyable).

Code: 6901002